Centaur Starting Gates Specifications

Listed below is the dimensions and type of materials used. 
We can build your gate according to custom specifications if needed.

Technical Specifications:

• Stall widths – 36"
• Stall Lengths – 84” Less head area
• Front Gates – 24” X 72” – 1” pipe frames with ½” pipe bars
• Tail Gates – 14” X 36” Slam type latches
• Gates and Partitions – 16 gauge sheet metal
• Frames on all gates – 1” schedule 40 pipe
• Partition frames – 1 ¼” schedule 40 pipe
• Main Outside Frames – 2 ½” schedule 40 pipe
• Front Gates Open off of ¾” dead bolt type pin
• All front gates are equipped with safety latches
• Springs – 12” X 1 5/8” OD extension
• Stall Rails – 2 ½” – 14 gauge square tubing
• Gate Main Framework – 3” X 3” X .188 wall, Square Steel Tubing

This information is accurate as of date of publication, but is subject to change without notice.

Contact Centaur@starting-gates.com with any questions or comments about our products.

Copyright © 2001-2007, Centaur Horse Walkers, Inc. ®. Privacy Policy